Barrel Pump
toss pumps
Barrel Pump
The TOSS electric and pneumatic drum pumps are centrifugal and self priming pumps, which provides a safe and accurate way to transfer liquids from drums, containers, tanks and totes. Pumps have vertical suction and horizontal discharge port. These are lightweight, handy and extremely powerful devices suitable for ransferring thin to low viscous,neutral or corrosive, aggressive & non-aggressive, non- flammable and non-explosive liquids.
Designed for portable and static use the pumps are
particularly suitable for intermittent operation. The state of the art design and high efficiency motors offer an accurate and cost effective alternative to the hazards of handling liquids. Modular concept design provides interchangeability of TOSS various tubes of different material to the standard high speed TOSS electric or air motor. The drum pumps eliminate the need to turn over barrels or drums to remove the liquid inside. The
pumps consists of: Pump tube
Electric or air motor
TOSS offers wide range of material variant for pump tubes as suitable for different types of pumped liquids.
Pump tubes are available in four basic versions as described below:
- Stainless steel AISI 316 pump
- Aluminium
- PP(Polypropylene) pump
- PVDF (Polyvinylidene Fluoride) pump
Motors are available in two basic versions as described below:
- Pump operated with high speed electric motor (14000 rpm at 50 Hz)
- Pump operated with air motor.
The mechanism of drum pumps is very simple. It consists of a vertical shaft inside a very narrow tube, which can fit into the opening at the top of a standard drum or container. A small motor, located at the top of the tube, is connected to the shaft. This motor is AC electric motor or Air motor, with a trigger switch. At the bottom of the tube is the pumping element itself. Turn on the pump, and the liquid will be drawn out in a steady flow. While using minimal power, drum pumps also lower the risk of spillage.
High Efficiency
Heavy Duty
Adaptability
Less Noise
These pumps are used for pumping out liquids from drums, barrels, large storage vessels, stainless steel tanks etc.
Drum pumps are widely used by different sectors such as:
- Chemical plants
- Food processing plants
- Packaging plants
- Plating
- Semiconductor
- Waste water treatment
- Pharmaceutical
- Laboratories
- Automotive industries
- Agriculture
These pumps are designed specially for drums, vats, totes, containers, carboys, open vessels up to 1.5 mtrs (60″) deep.
- Chemical High quality components
- Light weight, portable
- Easy to install, user friendly operation
- Ergonomically designed handle
- Safe chemical transfer, an alternative to manual - minimizes danger of spills, vapors, burns, health, environmental, liability concerns
- Pulsation free
- Inherent flooded suction
- Sealless design
- Operates by AC electric motor or pneumatic air motor.
- Few parts - maintenance friendly
- Pumps liquids with viscosity up to 750 cps
- Limited dry run capability
- Flow rates to 104 l/min (27 USgpm)
- Pressures to 2.4 bar (22 metres of head)
- Temperatures to +88°C (+190°F).
TOSS Stainless steel AISI 316 pump set is engineered for transferring light oils and suitable chemicals. Robust stainless steel AISI 316 construction offers excellent strength and durability.
| MODEL | SB-2/SS/FLP | SB-/SS/NFLP | PBSB-2 SS |
|---|---|---|---|
| Motor type | FLP ELECTRIC MOTOR |
NON FLP ELECTRIC MOTOR |
AIR MOTOR |
| Pump tube type | Stainless steel AISI 316 | ||
| Pump length | 1000 MM(39 INCH) | ||
| Pump design | Sealless centrifugal | ||
| Wetted parts | S.S AISI 316, Carbon filled PTFE | ||
| Discharge options | 25 mm (1") / 19 mm (3/4") hose barb | ||
| Hose | will be supplied as optional at extra cost | ||
| Dispensing nozzle | will be supplied as optional at extra cost | ||
| Shaft | Stainless steel AISI 316 | ||
| Barrel adapter | Stainless steel AISI 316 | ||
| Max. flow rate | 110 LPM(29 USgpm) | ||
| Max. pressure | 22 meter | 22 meter | 18 meter |
| Max. temperature | +80°C (+175°F) | ||
| Max. viscosity | 750 cps | ||
| Max. specific gravity | 1.8 | ||
Toss Aluminium Pump Set Is Engineered For Transferring Light Oils And Suitable Chemicals. Light Weight Design For The Pump Helps Easy Operating And Transfer.used For The Oil Industry.
| MODEL | SB-2/ALU/FLP | SB-/ALU/NFLP | PBSB-2 ALU |
|---|---|---|---|
| Motor type | FLP ELECTRIC MOTOR |
NON FLP ELECTRIC MOTOR |
AIR MOTOR |
| Pump tube type | Aluminium | ||
| Pump length | 1000 MM(39 INCH) | ||
| Pump design | Sealless centrifugal | ||
| Wetted parts | Aluminium, Carbon filled PTFE,PP | ||
| Discharge options | 25 mm (1") / 19 mm (3/4") hose barb | ||
| Hose | will be supplied as optional at extra cost | ||
| Dispensing nozzle | will be supplied as optional at extra cost | ||
| Shaft | Mild Steel | ||
| Barrel adapter | Aluminium | ||
| Max. flow rate | 80 LPM(29 USgpm) | ||
| Max. pressure | 22 meter | 22 meter | 18 meter |
| Max. temperature | +60°C (+140°F) | ||
| Max. viscosity | 750 cps | ||
| Max. specific gravity | 1.8 | ||
TOSS Polypropylene pump set is engineered for transferring a various types of corrosive liquids. Robust Polypropylene construction ensures chemical resistance against light to slightly aggressive chemicals.
| MODEL | SB-2/PP/FLP | SB-/PP/NFLP | PBSB-2 PP |
|---|---|---|---|
| Motor type | FLP ELECTRIC MOTOR |
NON FLP ELECTRIC MOTOR |
AIR MOTOR |
| Pump tube type | Polyproplyene | ||
| Pump length | 1000 MM(39 INCH) | ||
| Pump design | Sealless centrifugal | ||
| Wetted parts | Carbon filled PTFE, Polyproplyene,Heist Alloy -c | ||
| Discharge options | 25 mm (1") / 19 mm (3/4") hose barb | ||
| Hose | will be supplied as optional at extra cost | ||
| Dispensing nozzle | will be supplied as optional at extra cost | ||
| Shaft | Heist Alloy-C | ||
| Barrel adapter | will be supplied as optional at extra cost | ||
| Max. flow rate | 90 LPM(29 USgpm) | ||
| Max. pressure | 22 meter | 22 meter | 18 meter |
| Max. temperature | +60°C (+140°F) | ||
| Max. viscosity | 750 cps | ||
| Max. specific gravity | 1.8 | ||
TOSS PVDF pump set is engineered for transferring highly concentrated and aggressive liquids. Robust PVDF construction offers excellent durability and chemical resistance.
| MODEL | SB-2/PVDF/FLP | SB-/PVDF/NFLP | PBSB-2 PVDF |
|---|---|---|---|
| Motor type | FLP ELECTRIC MOTOR |
NON FLP ELECTRIC MOTOR |
AIR MOTOR |
| Pump tube type | PVDF | ||
| Pump length | 1000 MM(39 INCH) | ||
| Pump design | Sealless centrifugal | ||
| Wetted parts | Carbon filled PTFE, PVDF,Heist Alloy -c | ||
| Discharge options | 25 mm (1") / 19 mm (3/4") hose barb | ||
| Hose | will be supplied as optional at extra cost | ||
| Dispensing nozzle | will be supplied as optional at extra cost | ||
| Shaft | Heist Alloy-C | ||
| Barrel adapter | will be supplied as optional at extra cost | ||
| Max. flow rate | 90 LPM(29 USgpm) | ||
| Max. pressure | 22 meter | 22 meter | 18 meter |
| Max. temperature | +60°C (+140°F) | ||
| Max. viscosity | 750 cps | ||
| Max. specific gravity | 1.8 | ||
