Sewage Submersible Pump
toss pumps
Sewage Submersible Pump
RESP Portable sewage pumps are designed to handle drainage and light sewage application with robust construction and low maintenance with reliable design.REDP series are designed for pumping for raw sewage, sludge and effluent liquids containing large proportion of solid and fibrous matter.
These compactly designed pumps are easy to handle and can be installed permanently with the help of auto coupling in the small sump from where sewage is to be pumped or can be used for portable duty. Being submersible, they do not require any pump house.
High Efficiency
Heavy Duty
Adaptability
Less Noise
| RESP | REDP | |
|---|---|---|
| Motor | Two Pole Continuous Duty Squirrel Cage Submersible Type Induction Motor |
Four pole continuous duty squirrel cage submersible type induction motor |
| Insulation Class | F | F |
| Protection | IP – 68 / Thermal Over Load | IP-68/Thermal Overload / Moisture |
| Cable | PVC Insulated Copper Conductor Flexible | PVC Insulated Double Sheathed Copper Conductor Flexible |
- Construction Dewatering
- Commercial Waste Water
- Dewatering in heavy industries like power,
- steel, fertilizer, cement
- Effluent handling in chemical and process industries
- Hotel & hospital
- Municipal Sewage and drainage application
- Rain water Dewate Ring
| Motor Body | S.S 202 |
|---|---|
| Pump Casing | C.I IS 210FG260/S.S 304/S.S 316 |
| Impeller | C.I IS 210FG260/S.S 304/S.S 316 |
| Shaft: | S.S 404 |
| Strainer: | S.S 202 |
| Mech. Seal: | Double Type: SIC Vs SIC/ TC Vs TC |
| Bearing: | Deep Groove Bail Bearing (SKF) |
| MODEL | H.P | DEL SIZE |
SOLID SIZE |
HEAD IN METER |
2 | 4 | 6 | 8 | 10 | 14 | 18 | 20 | 24 | SHUT OF |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| RESP- 1.0V/2.0 |
1 | 50 | 18 | DISCHARGE IN LPM |
400 | 350 | 300 | 240 | 145 | 13.5 | ||||
| RESP- 2.0Q/2.0 |
2 | 50 | 32 | 800 | 720 | 630 | 540 | 420 | 230 | 16.5 | ||||
| RESP- 3.0/2.0 |
3 | 50 | 25 | 770 | 680 | 460 | 380 | 210 | 21.5 | |||||
| RESP- 5.0/2.0 |
5 | 50 | 25 | 805 | 700 | 460 | 350 | 150 | 28 | |||||
| HEAD IN METER |
4 | 6 | 8 | 10 | 12 | 14 | 16 | 18 | ||||||
| RESP- 3.0/3.0 |
3 | 80 | 32 | DISCHARGE IN LPM |
1300 | 1100 | 1000 | 895 | 600 | 370 | 160 | 17.3 | ||
| RESP- 5.0/3.0 |
5 | 80 | 36 | 1800 | 1600 | 1460 | 1350 | 1200 | 950 | 690 | 470 | 20 | ||
| HEAD IN METER |
6 | 8 | 12 | 14 | 18 | 20 | 24 | 28 | 32 | |||||
| RESP- 5.0/4.0 |
5 | 100 | 42 | DISCHARGE IN LPM |
2300 | 1750 | 1200 | 650 | 16 | |||||
| RESP- 7.5/4.0 |
7.5 | 100 | 42 | 2700 | 2500 | 1900 | 1300 | 990 | 400 | 22 | ||||
| RESP- 10.0/4.0 |
10 | 100 | 42 | 3000 | 2800 | 2050 | 1400 | 1200 | 950 | 400 | 27 | |||
| RESP- 15.0/4.0 |
15 | 100 | 50 | 3200 | 3000 | 2200 | 1600 | 1400 | 1200 | 900 | 450 | 32 | ||
| RESP- 20.0/4.0 |
20 | 100 | 50 | 3800 | 3250 | 2980 | 2700 | 2600 | 2200 | 1750 | 900 | 36 |
| MODEL | H.P | DEL SIZE |
SOLID SIZE |
HEAD IN METERS |
2 | 4 | 6 | 8 | 10 | 12 | 14 | 16 | 18 | 20 | 22 | SHUT OFF |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| REDP- 3.0/4 |
3 | 100 | 40 | DISCHARGE IN LPM |
1350 | 1100 | 900 | 800 | 450 | 250 | 15 | |||||
| REDP- 5.0/4 |
5 | 100 | 60 | 1800 | 1650 | 1500 | 1400 | 1100 | 800 | 520 | 120 | 17 | ||||
| REDP- 7.5/4 |
7.5 | 100 | 65 | 2400 | 2200 | 2000 | 1750 | 1300 | 900 | 400 | 17 | |||||
| REDP- 10.0/4 |
10 | 100 | 65 | 2600 | 2450 | 2350 | 2100 | 1800 | 1400 | 750 | 18 | |||||
| REDP- 15.0/4 |
15 | 100 | 75 | 3900 | 3450 | 3300 | 3000 | 2700 | 2350 | 1950 | 1450 | 900 | 300 | 23 | ||
| REDP- 15.0/6 |
15 | 150 | 100 | 5180 | 4750 | 4350 | 3700 | 3000 | 2100 | 1250 | 375 | 19 | ||||
| REDP- 20.0/6 |
20 | 150 | 100 | 6000 | 5600 | 5100 | 4600 | 4100 | 3500 | 3000 | 2300 | 1600 | 850 | 24 | ||
| HEAD IN METERS |
6 | 8 | 12 | 16 | 20 | 24 | 28 | 32 | 36 | 40 | 45 | |||||
| REDP- 20.0/4 |
20 | 100 | 60 | DISCHARGE IN LPM |
2250 | 2100 | 1950 | 1800 | 1550 | 1200 | 550 | 35 | ||||
| REDP- 25.0/4 |
25 | 100 | 60 | 2650 | 2580 | 2460 | 2280 | 2100 | 1850 | 1550 | 1200 | 780 | 700 | 39 | ||
| REDP- 30.0/4 |
30 | 100 | 60 | 2950 | 2880 | 2760 | 2580 | 2400 | 2160 | 1900 | 1600 | 1200 | 1350 | 700 | 44 | |
| REDP- 35.0/4 |
35 | 100 | 60 | 3250 | 3150 | 3000 | 2850 | 2700 | 2450 | 2250 | 2000 | 1720 | 49 | |||
| REDP- 25.0/6 |
25 | 150 | 100 | 5430 | 5100 | 4350 | 3500 | 2250 | 600 | 25 | ||||||
| REDP- 30.0/6 |
30 | 150 | 100 | 5930 | 5680 | 5050 | 4350 | 3120 | 1620 | 26 | ||||||
| REDP- 35.0/6 |
35 | 150 | 100 | 6500 | 6250 | 5620 | 4850 | 4000 | 3000 | 1600 | 34 | |||||
| HEAD IN METERS |
6 | 10 | 15 | 20 | 25 | 30 | 35 | 45 | 50 | 55 | 60 | |||||
| REDP- 40.0/6 |
40 | 150 | 100 | DISCHARGE IN LPM |
6700 | 6100 | 5300 | 4400 | 3200 | 2000 | 6500 | 37 | ||||
| REDP- 50.0/6 |
50 | 150 | 100 | 6450 | 6000 | 5200 | 4400 | 3500 | 2400 | 44 | ||||||
| REDP- 60.0/6 |
60 | 150 | 100 | 6500 | 6000 | 5500 | 5000 | 4400 | 3000 | 2250 | 1200 | 60 |
